Drilling and milling machines Arboga A 2508 U and A 4008 UM
Combined drilling and milling machine Suitable for repair, maintenance and training purposes as drilling and milling can be performed in the same setup. The drill head can be raised, lowered and angled at 0–45° in both directions and the desired angle can be set against a graduated scale. Bench, column and drill head are mounted on a sturdy welded stand. Gear operation and gearbox with helical gears made of steel and fibre material for a silent machine requiring minimum maintenance. Quick and easy speed selection. The drill spindle is equipped with a threaded spindle nose with lock nuts to attach milling chucks. A wheel on the front of the drill head allows you to lower the drill spindle for fine feeding.
A 2508 U Supplied with coordinate table, 2-speed motor and motor protection with zero voltage release – enclosure class IP 41.
Size of packaging: 83x52x165 cm, weight 330 kg
| Manufacturer´s description |
A 2508 U
|
|---|---|
| ETIM class code |
EC004302
|
| Feed |
Manual
|
| Motor voltage |
400 V 50 Hz
|
| No. of bevels |
3-phase
|
| Rated current |
1.8 A,
2.3 A
|
| Drill capacity in steel |
25 mm
|
| Thread capacity |
16 M
|
| Spindle nose |
3 MK
|
| Spindle movement |
135 mm
|
| Spindle speed |
890 r/min,
105 r/min,
210 r/min,
350 r/min,
445 r/min,
700 r/min,
1450 r/min,
2900 r/min
|
| Column diameter |
140 mm
|
| Distance spindle centre-column |
258 mm
|
| Distance spindle nose-table, max |
425 mm
|
| Coordinate table length |
584 mm
|
| Coordinate table width |
242 mm
|
| T-slot width, bench |
14 mm
|
| T-slot c/c |
60 mm
|
| Sound level |
76 dB (A)
|
| Weight |
270 kg
|
| Enclosure class IP |
IP41
|
| Model |
Bed plate
|
