Screw with plug Elfa
Installing a support strip on a wooden wall:
- For mounting on walls with plasterboard over the wooden core or directly on a wooden wall.
- Pre-drill with a 3 mm drill bit to obtain a pilot hole corresponding to the length of the drill.
- The plug is not used.
- Tighten with a screwdriver.
Installing a support bar on concrete, stone or brick walls, etc. :
- Use a 8 mm hammer drill to drill the holes.
- Insert the expander plug.
- Tighten with a screwdriver.
Manufacturer´s description |
470696
|
---|---|
ETIM class code |
EC004764
|
Outside diameter |
10 mm
|
Length |
64 mm
|
Fetching article information