Description

Type 180 Champion. With frame saw for 180 mm cutting heights and 125 mm cutting width at 45?. Die-cast aluminium and machined table with heavy-duty steel feet. Saw guides with low friction against the saw. Full width support surfaces for exact positioning of the work piece. The saw angle is easily set using a graduated scale and is lockable at each required angle. In addition, it has fixed positions for 90° and 45°, as well as for sawing 5, 6, 8 and 12 side frames, i.e. 36°, 30°, 22.5° and 15° in both directions. Fixed position to tilt the work piece at different angles for double mitring. Fixed angles for inclines 20°, 30°, 40°, 45°, 50°, 55° and 60°. The raising ends are unhooked when double mitring. Two material clamps for accurate fastening of the work piece. Length stop for settings up to 900 mm, where the length stop is pulled out of the saw table. Length scale on table. Automatic suspension of the saw frame in the uppermost position. Transport bracket for setting the saw frame parallel to the table when transporting or storing.

Supplied with one tooth-point hardened saw blade 18 tpi.