Drilling and milling machines, belt-driven Luna MDM 250
Belt-driven combined drill and milling machine. Suitable for tool and model work when drilling and milling can be carried out in the same mounting. The drill spindle is equipped with both a quick advance, where the feed lever works directly against gear rack on the spindle housing and with a finmatningsratt. Binding tools is done via a carriage beam. The machine has variable adjustment of the spindle speed.
Supplied with motor, motor cut-out and zero voltage tripping.
| Manufacturer´s description |
MDM 250
|
|---|---|
| ETIM class code |
EC004302
|
| Feed |
Manual
|
| Motor voltage |
230 V 50 Hz
|
| No. of bevels |
1-phase
|
| Rated current |
4.3 A
|
| Drill capacity in steel |
25 mm
|
| Milling capacity, flat face milling |
50 mm
|
| Milling capacity, end milling |
25 mm
|
| Thread capacity |
12 M
|
| Spindle nose |
3 MK
|
| Spindle movement |
70 mm
|
| Spindle speed |
100-1750 r/min
|
| Distance spindle nose-table, max |
350 mm
|
| Coordinate table length |
550 mm
|
| Coordinate table width |
160 mm
|
| Lengthwise movement |
300 mm
|
| Cross movement |
160 mm
|
| Weight |
165 kg
|
| Model |
Bench
|
Fetching article information
