Drilling and milling machine (belt driven) L&N LDM 250
Belt driven, combined drilling and milling machine.
Suitable for tool and model work (drilling and milling can be performed in the same setup).
The drill spindle features rapid feed (the feed lever works directly with the gear rack on the spindle sleeve) and a fine feed wheel.
The tools are locked in place with a tie bar.
The machine allows stepless control of the spindle speed.
Supplied with motor, motor protection and zero voltage release.
Manufacturer´s description |
LDM 250
|
---|---|
ETIM class code |
EC004302
|
Feed |
Manual
|
Motor voltage |
230 V
|
No. of bevels |
1-phase
|
Rated current |
4.3 A
|
Drill capacity in steel |
25 mm
|
Milling capacity, flat face milling |
50 mm
|
Milling capacity, end milling |
25 mm
|
Thread capacity |
12 M
|
Spindle nose |
3 MK
|
Spindle speed |
100-1750 r/min
|
Distance spindle nose-table, max |
350 mm
|
Coordinate table length |
550 mm
|
Coordinate table width |
160 mm
|
Lengthwise movement |
300 mm
|
Cross movement |
160 mm
|
Weight |
165 kg
|
Model |
Bench
|
Fetching article information