Drill and milling machine with gearbox Luna MDM 400 and MDM 401
Combined drill and milling machine with gearbox. Suitable for tool and model work when drilling and milling can be carried out in the same mounting. The drill spindle is equipped with both a quick advance, where the feed lever works directly against gear rack on the spindle housing and with a fine feed wheel. Binding tools is done via a carriage beam.
All speeds are based on 50Hz.
20457-0204 has spindle taper ISO 30.
The drill head can be rotated 0-45° in both directions.
Supplied with a 2-speed motor and motor protector with zero voltage release.
Limit digital measurement equipment assembly price on request.
ETIM class code |
EC004302
|
---|---|
Feed |
Manual
|
Motor voltage |
230 V 50 Hz
|
No. of bevels |
3-phase
|
Rated current |
3.2 A
|
Drill capacity in steel |
40 mm
|
Milling capacity, flat face milling |
76 mm
|
Thread capacity |
19 M
|
Spindle movement |
130 mm
|
Spindle speed |
50-1250 r/min,
60-1500 r/min
|
Column diameter |
75 mm
|
Distance spindle centre-column |
255 mm
|
Distance spindle nose-table, max |
470 mm
|
Distance spindle nose-table, min |
110 mm
|
Coordinate table length |
730 mm
|
Coordinate table width |
210 mm
|
Lengthwise movement |
500 mm
|
Cross movement |
270 mm
|
T-slot width, bench |
14 mm
|
T-slot c/c |
56 mm
|
Weight |
290 kg
|
Model |
Bench
|
Fetching article information